Process exit code:1073741819

I have changed a SSIS package last week. Now, I met the problem that the package sometimes failed both in SQL agent and the BIDs.

SQL agent just give the detail: Process Exit Code -1073741819. The step failed.

In BIDs,when I Check the log,there is even no error. But the last Infomation in the output windows is the package canceled. It just like somebody stop running package manually.

The more strange thing is the package sometimes succeed with running the same data.

Thanks for your help

We have a build process (using Visual Build Pro) that has magically developed a problem. When building one of our installers (using the InstallShield project step) it fails with the message "Process completed with exit code -1073741819". However, there is no error actual thrown during the building of the installer by InstallShield.

I have set the step to log the command line being executed and have manually run that exact command line in a command prompt. This completes with no problems. The project also compiles no problem with the InstallShield GUI, so there should really be no problem compiling it with the command line.

So the next thing I did was to use a Call Program step and pasted that same command line call into it. Same error message as the InstallShield project step that I mentioned above.

Then I tried modifying that Call Program step and made it call: %DOSCMD% call "C:\Program Files... so that it would actually pass it to a command prompt for execution. This works. So I found a work around.

I Googled this error number in correspondance with Visual Build and InstallShield but found nothing helpful. The only thing I did find talked about handling the step finished event and overriding that error number as a successful step. However, the project hasn't fully finished building at this point, so it really wasn't successful. We need it to actually build the installer.

We have also determined that this is NOT a problem with any changes made to the installer project or build file as we reran a previous build that had succeeded and now also gets that same error message.

The only change that I am aware of that was done to that machine was that it was rebooted since the last successful build (which was yesterday morning). So unless a Microsoft patch was installed that I was unaware of or someone else installed something (unlikely since I am really one of only two people who uses that box and the other guy didn't install anything on it), nothing has been installed/uninstalled from it.

I do not believe this is specifically an InstallShield problem as it builds fine using the exact command line that the step is trying to execute. I think Visual Build is picking up a return code from the InstallShield output that it shouldn't be.

Has anyone else experienced this or knows the fix for it?

Visual Build Pro v6.1
InstallShield v11.5

One more note: we did experience this same error message about a month or so ago as well. At that time we had InstallShield 10.5 as well as 11.5 on the box. Uninstalling 10.5 fixed the problem at that time. As stated above, I am not aware of anything being installed to or uninstalled from the box since yesterday morning.

from:http://www.kinook.com/Forum/showthread.php?threadid=1791|||Thanks for your reply.
The error that I've post is taken after I've checked "Show step
details". OK, I'll post the error again completely :

Executed as user: XXXX\xxxx. ...un OnStart:
DTSStep_DTSExecuteSQLTask_6 DTSRun OnFinish:
DTSStep_DTSExecuteSQLTask_6 DTSRun OnStart:
DTSStep_DTSExecuteSQLTask_10 DTSRun OnFinish:
DTSStep_DTSExecuteSQLTask_10 DTSRun OnStart:
DTSStep_DTSDataPumpTask_1 DTSRun OnStart: DTSStep_DTSDataPumpTask_2
DTSRun OnStart: DTSStep_DTSDataPumpTask_4 DTSRun OnStart:
DTSStep_DTSDataPumpTask_3 DTSRun OnStart: DTSStep_DTSDataPumpTask_2
DTSRun OnStart: DTSStep_DTSDataPumpTask_4 DTSRun OnStart:
DTSStep_DTSDataPumpTask_4 DTSRun OnStart: DTSStep_DTSDataPumpTask_4
DTSRun OnStart: DTSStep_DTSDataPumpTask_4 DTSRun OnStart:
DTSStep_DTSDataPumpTask_4 DTSRun OnStart: DTSStep_DTSDataPumpTask_4
DTSRun OnStart: DTSStep_DTSDataPumpTask_4 DTSRun OnStart:
DTSStep_DTSDataPumpTask_4 DTSRun OnStart: DTSStep_DTSDataPumpTask_4
DTSRun OnStart: DTSStep_DTSDataPumpTask_4 DTSRun OnStart:
DTSStep_DTSDataPumpTask_4 DTSRun OnStart: DTSStep_DTS... Process
Exit Code -1073741819. The step failed.

from:http://www.thescripts.com/forum/thread155774.html|||That's pretty anonymous. Unfortunately I don't know DTS, so I don't
have any suggestions to offer. Maybe the people in
microsoft.public.sqlserver.dts has any ideas.

from:|||--------------------------------------------------------------------------------

Some Googling suggests that the error may be caused by a Windows bug:

http://support.microsoft.com/defaul...kb;EN-US;306497
http://groups-beta.google.com/group...lr=&sa=N&tab=wg

If you don't already have the latest servicepacks for Windows and
MSSQL, it would probably be worth installing them to see if that
resolves the issue. Since a few people seem to have seen this error in
connection with a virus infection, that would be something else to
check. If this doesn't help, then it might be worth calling Microsoft.|||I think you are encountering a bug in the BOINC API Library. This is partly fixed in an Einstein@.Home beta test application available from the Einstein@.Home front page (bottom left hand corner). Please spend a few minutes and install this. Walt Gribben recently tracked down (this week) and fixed the remainder of this problem, so in the next couple of weeks we should be able to release a new application that hopefully takes care of this problem entirely.

from:http://einstein.phys.uwm.edu/forum_thread.php?id=2888|||Hi, Do you have an ATI graphics card per chance?

I have this installed on my new P4 3.0ghz machine with an ATI x600 PCI Express card and it will not run the globe graphics. It will run seti, but I get a very similar message to you when I interupt the screesaver to do some work.

I have boinc on a P4 2.53ghz machine with a Nvidia 5900 agb board and it works fine.

Please can someone sort out the ati issues.|||I keep getting compute errors, eventhough I do not get compute errors on S@.H or P@.H. One example is below. This particular failure cost me 29000 secs of work. I'm using a notebook on this, so the computer is off and on several times a day.

4.45
The semaphore cannot be set again. (0x67) - exit code 103 (0x67)

detected finished Fstat file - skipping Fstat run 1
Resuming computation at 19947/1715206/1726153
ERROR! sftIndex = -1076102
|||As Bernd Machenschalk suggested to Andrew Dickey in the preceding posts, maybe you should try the Beta Application. Einstein 4.79 (which I presume you are running) is not completely "up to speed" with BOINC 4.45. There is a known "graphics" bug related to running the two and Client error Computing messages are a common symptom. The Beta App fixes the "graphics" bug. The link to it is under More Informationon the E@.H home page.
|||I am surprised and disappointed too. The Beta App worked for me (and others also). Your error report is a new on me. Hopefully, you will get a response from one of the developers soon. A bit of warning - they will probably ask you to "unhide" your computer so they can have access to more info about the problem. If you are a little uneasy about this, I suggest you click on my name and check out the type of information that is made available when you do this. Good luck! I hope you get things straightened out soon.|||Did you get any 0xC0000005 errors with the .018 version? The one you reported in the other thread looks like a completely different error. It would be nice to know whether your other WU's - the ones with 0xC0000005 errors - were crunched with 0.18 or an earlier version.
|||Damn! It failed again, with yet another error statement. This time, I put the notebook into hibernation, went home, resumed using the wireless rather than the hardwire network connection, and checked about an hour later. The damn thing bombed again. Now I have a bundle of P@.H's to do before the next E@.H wu is started. I'm really wasting cycles with this problem.

Here is what it said...
Resuming computation at 3903/180714/204114
No heartbeat from core client for 31 sec - exiting
detected finished Fstat file - skipping Fstat run 1
Resuming computation at 7991/499486/502366

***UNHANDLED EXCEPTION****
Reason: Access Violation (0xc0000005) at address 0x004097A7 read attempt to address 0x2E5EBC90

1: 10/01/05 19:59:55
1: c:cygwinhomebemaeinsteinathomecfswindows_build.18cfslaldemod.c(854) +20 bytes (TestLALDemod)
1: c:cygwinhomebemaeinsteinathomecfswindows_build.18computefstatistic.c(728) +28 bytes (boincmain)
1: c:cygwinhomebemaeinsteinathomecfswindows_build.18computefstatistic.c(3082) +20 bytes (worker)
1: c:cygwinhomebemaeinsteinathomecfswindows_build.18boincapigraphics_impl.c(75) +0 bytes (foobar)|||Thanks for answer. Yesterday, without screensaver mode I had first good result in Einstein@.home (wheras LHC@.home and SETI@.home work continuously without errors). Then I changed to Einstein 0.18 and to newest 7.8.0.1. driver for my NIVIDA Geforce FX 5200 graphic card and leaved project for night working and Unfotunatelly I had the same error messages in the mornig as before:

1.Application error. Memory can't be written.

2.2005-10-02 09:59:41|Einstein@.Home|Unrecoverable error for result l1_1317.0__1317.4_0.1_T09_S4lB_2 ( - exit code -1073741819 (0xc0000005))

Einstein obviously does'nt want to work at night ;) and I'm starting to think, that in such cases maby more effectively for humanity science at whole ist switching immediatelly to another project than spending hours on finding some error. I'm asking myself: Why to repair some tool (maby computer??)if it can work as another tool, without any additional effort ?|||Thanks for answer. Yesterday, without screensaver mode I had first good result in Einstein@.home (wheras LHC@.home and SETI@.home work continuously without errors). Then I changed to Einstein 0.18 and to newest 7.8.0.1. driver for my NIVIDA Geforce FX 5200 graphic card and leaved project for night working and Unfotunatelly I had the same error messages in the mornig as before:

1.Application error. Memory can't be written.

2.2005-10-02 09:59:41|Einstein@.Home|Unrecoverable error for result l1_1317.0__1317.4_0.1_T09_S4lB_2 ( - exit code -1073741819 (0xc0000005))

Einstein obviously does'nt want to work at night ;) and I'm starting to think, that in such cases maby more effectively for humanity science at whole ist switching immediatelly to another project than spending hours on finding some error. I'm asking myself: Why to repair some tool (maby computer??)if it can work as another tool, without any additional effort ?[/quote]

I am sorry it didn't work. Obviously, the Beta App doesn't fix all the BOINC 4.45/Einstein 4.79 bugs. I suggest you post your problem and error message on the Beta App Message Board [Message boards : Cafe Einstein : NEW: WINDOWS TEST APPLICATION FOR EINSTEIN@.HOME]. In the meantime, I guess reverting back to 4.79 without graphics is the way to go.|||Did you find an answer?
I am struggling with the same problem...